Errors when receiving a text message, Self-help with error messages – Siemens CX203isdn User Manual
Page 61
60
SMS (text messages)
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / sms.fm / 14.11.2005
You can display information about the cause of errors on the screen.
Precondition: You have opened the incoming message list (page 56).
Errors when receiving a text message
A message appears on the screen if your phone cannot receive any more text messages.
You cannot receive text messages under the following conditions:
◆
Call diversion is activated with Immediately,
◆
the memory (incoming and outgoing message lists) is full.
Self-help with error messages
If you have set up an SMS centre but have not yet registered with the centre, Sending
text notification
appears in the display. The message is stored in the incoming message
list FD error:.
s
Scroll to the text message you were unable to send.
W
Open the submenu.
s
Error status
Select the menu item and confirm. The cause of the
error appears in the display.
[RRRRRRRRRRRRRRRRRRRRRRRRRRR]
BACK
Now press the display key to return to the incoming
message list.
OK
Error Message
Possible Cause
Remedy
You cannot send messages.
The "Calling Line Identification"
(CLIP) is permanently withheld.
Permit Calling Line
Identification (CLIP) again
Message transmission was
interrupted (e.g. by an
incoming call).
Re-send the message.
No number or an invalid
number is entered for the SMS
centre activated as the send
centre.
Enter phone number
You receive a message whose
text is incomplete.
Your phone's memory is full.
Delete some old messages
The message is played back.
Your terminal is stored in the
database of your SMS provider
as having no fixed network
SMS functionality, i. e. you are
no longer registered with the
provider.
Register the terminal (again)
for SMS reception.
Messages are only received
during the day.
If your SMS network provider's
database does not yet know
that your terminal supports
fixed network SMS
functionality, then it will only
attempt to deliver messages
during the day.
Register the terminal (again)
for SMS reception to get it re-
assigned in the database.
No send centre available! SMS
only saved.
You have not entered an SMS
centre.
Activate an SMS centre