Siemens CX203isdn - Manual (Page 33)

32
Functions during a call
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / during.fm / 14.11.2005
Working with call waiting for an external call – CW (Call Waiting)
Precondition: CW (Call Waiting) set up, see page 104.
You hear the call waiting tone (short beep) if you receive an external call while
conducting another call (internal or external). The caller's number or name will appear
in the display if Calling Line Identification is enabled.
There are four ways to work with call waiting for an external call:
Accept the waiting call – enquiry call:
Press the display key
ACCEPT . You answer the call waiting call, and the first call is put on
hold. Both parties are shown on the display, the current one is marked.
To toggle between both callers see page 29, for a conference call see page 30.
Reject the waiting call
Press the display key
REJECT to reject a call on call waiting.
Changing parties
Forward call waiting internally
You can forward the call waiting call internally without answering the call.
i If you reject the call waiting tone on your base station, it can still be heard
on other registered terminals.
a
End your current call. The waiting call becomes a
normal call.
c
Lift the receiver to answer the call.
i
Open the menu.
s
Forward
Select the menu item and confirm.
s
INT11: Int.11
Select and confirm the internal number you want,
e.g., INT11: Int.11.
either ...
The call waiting tone ceases. The call on call waiting
was successfully forwarded.
Continue the active call.
or ...
You continue to hear the call waiting tone. The call
on call waiting could not be forwarded.
OK
OK
i Forwarding is only possible to internal users who are not already being
called.