Siemens CX203isdn - Manual (Page 81)

80
Setting the answering machine (on CX253isdn)
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / answeringm_config.fm / 14.11.2005
Setting time control for Saturday or Sunday
By factory default, the time control for working days is used: As for Mon-Fri.
Precondition: You have selected an answering machine (page 61).
Activating/deactivating time control
By factory default, time control is deactivated.
Precondition: You have at least set a start time (page 79) and have selected an
answering machine (page 61).
s
Start time
Select the menu item and confirm.
~
Enter the start time (4-digit). The start time specifies
the end of the previous time section.
W Press the display key to open the submenu.
Save entry Confirm.
j
Hold down (back to idle status).
OK
OK
s
Settings Select the menu item and confirm.
s
Time control Select the menu item and confirm.
either ...
s
Saturday Select the menu item and confirm.
or ...
s
Sunday Select the menu item and confirm.
... then
s
As for Mon-Fri
Select As for Mon-Fri, Ann. 1 24h, Ann. 2 24h,
Ann. only 24h
or AM off and confirm.
j
Hold down (back to idle status).
OK
OK
OK
OK
OK
s
Settings Select the menu item and confirm.
s
Time control
Select the menu item and confirm (
‰
= activated).
either ... Activate time control:
Activate?
Confirm.
or ... Deactivate time control:
Deactivate?
Select the menu item and confirm.
OK
OK
OK
OK