Siemens CX203isdn - Manual (Page 9)

8
Preparing the base station for use
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / starting.fm / 14.11.2005
Connecting the base station
Note the specified sequence
Socket for coiled
receiver cord
Socket for
power cord
Socket for ISDN
connection cable
Schematic illustration
Underside of
base station
(enlarged view)
◆ Insert the plug on the long end of the coiled receiver cord into the socket on the
base station
◆ Place the receiver cord in the cable recess
◆ Plug the other end of the receiver cord into the receiver
◆ Plug one of the ISDN connecting cable jacks into the socket on the base station
(it clicks into place)
◆ Position cable in the cable recess
◆ Insert the second ISDN connecting cable jack into the NTBA (ISDN connection).
2.
ISDN connection
cable (NTBA)
1.
1.
Telephone plug
with ISDN cable