Siemens CX203isdn - Manual (Page 106)

105
System settings
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / settings_bs.fm / 14.11.2005
Initiating an enquiry call see page 27 or page 28.
Setting up the waiting melody
An external caller hears the set waiting melody when the connection is on hold in the
base station (internal) (page 104). An external party whose connection is on hold in the
telephone exchange (external), and an internal user who is on hold, will not hear a
waiting melody.
The following settings can be selected:
i
Open the menu.
s
Set base Select the menu item and confirm.
s
Settings Select the menu item and confirm.
~
Enter system PIN if required (page 89).
s
ISDN settings Select the menu item and confirm.
either ... Set Int. enq. call:
s
Int. enq. call Select the menu item and confirm (
‰
= activated).
or ... Set Ext. enq. call:
s
Ext. enq. call Select the menu item and confirm (
‰
= activated).
j
Hold down (back to idle status).
OK
OK
OK
OK
OK
OK
Internal
The party on hold hears the waiting melody of
the base.
Off
When the waiting melody is deactivated, a setting
cannot be made.