Siemens CX203isdn - Manual (Page 76)

75
Setting the answering machine (on CX253isdn)
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / answeringm_config.fm / 14.11.2005
Hiding/showing an answering machine
If you only want to use one or two answering machines for your connection, you can
hide the other answering machine(s) from all displays and menus.
When hidden there must be no messages or memos remaining in the answering
machine:
◆ If there are new messages/memos you have not yet played back on the answering
machine, you will be notified when you try to hide it. The answering machine will
continue to be shown.
◆ If, when you wish to hide an answering machine, it still contains old messages/
memos that have already been played back, you will be asked if you wish to delete
the old recordings. The answering machine is only hidden if you confirm with YES .
When an activated answering machine is hidden it is deactivated. When it is set to show
again, the answering machine returns to the status it had before it was hidden.
i
Open the menu.
s
Set base Select the menu item and confirm.
s
Settings Select the menu item and confirm.
s
Setup user Select the menu item and confirm.
Setup device Confirm. The list of internal numbers is displayed.
s
Select the internal numbers for the answering
machine (INT 91, INT 92 or INT 93).
W Open the submenu.
either ... Hide answering machine:
s
Hide AM?
Select the menu item and confirm.
or ... Show answering machine:
s
Show AM?
Select the menu item and confirm.
j
Hold down (back to idle status).
OK
OK
OK
OK
OK
OK