Siemens CX203isdn - Manual (Page 102)

101
System settings
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / settings_bs.fm / 14.11.2005
Activating/deactivating handsfree dialling
If you have activated Dial handsfree , you can dial without lifting the receiver. As soon as
you have entered the first digit, the line is seized and handsfree is automatically
activated.
Pre-assigning the call forwarding destination – CD (Call Deflection)
The call forwarding destination for incoming calls is pre-set here. This destination
number is offered as a preset for manual forwarding (page 31).
Setting up automatic call diversion if a terminal is not available
If your handset is out of the radio range of the base station, the battery is flat, or the
handset has been deactivated, a call will be forwarded an external phone numbers you
specify.
Preconditions:
◆ You have exclusively assigned the handset its own receive MSN (page 94). This
MSN must not be assigned as the receive MSN for any other device, not even the
ISDN bus!
◆ Call diversion can only be set up for one receive MSN on the base station.
i
Open the menu.
s
Settings
Select the menu item and confirm.
s
Dial handsfree
Select the menu item and confirm ( ‰ = set).
j
Hold down (back to idle status).
OK
OK
i
Open the menu.
s
Set base
Select the menu item and confirm.
s
Settings
Select the menu item and confirm.
~
Enter system PIN if required (page 89).
s
ISDN settings
Select the menu item and confirm.
s
Forward. dest. Select the menu item and confirm.
~
W Enter destination number and open the submenu.
Save entry Confirm.
j
Hold down (back to idle status).
OK
OK
OK
OK
OK
OK