Siemens CX203isdn - Manual (Page 92)

91
Security settings
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / security.fm / 14.11.2005
Setting up, editing, reading and deleting personal emergency numbers
Dialling emergency numbers
Precondition: The base station is blocked for external dialling (page 90).
If the dialled number does not match the emergency number entered, the call is
rejected with the display "Number is not emergency no.".
i
Open the menu.
s
Set base
Select the menu item and confirm.
s
Settings
Select the menu item and confirm.
~
If required, enter the PIN and confirm (page 89).
Security
Confirm.
s
Emergency nos.
Select. The emergency numbers list is opened.
s
Select list entry, e.g. .
W Press the display key to open the submenu.
either ... Set up or edit emergency number:
Change number Confirm.
~
Enter new emergency number (up to 32 digits) or
edit existing emergency number. You can transfer
the number from the Phonebook h.
W Press the display key to open the submenu.
Save entry Confirm.
or ... View emergency number:
s
Display number Select the menu item and confirm.
or ... Delete emergency number:
s
Delete number
Select the menu item and confirm.
j
Hold down (back to idle status).
OK
OK
OK
OK
OK
OK
OK
OK
i
If your phone is connected to a PABX you may have to enter the applicable
access code (outside line code, e.g. 0; see page 124) before the
emergency number. This also applies to preset emergency numbers for
which you need to re-enter e.g. "0110" and "0112" as an alternative.
c
Lift the receiver.
[RRRRRRRRRRRRRRRRRRRRRRRRRR] EMERG.
Press the display key.
... then Dial the emergency number:
~
Enter the emergency number.