Siemens SX763 - Manual (Page 98)

98
Configuring Advanced Settings
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006
Sc
hablone 2
005_0
5_02
Print Server
Your device's integrated print server allows you to offer a USB printer to all users in the
local network.
If you wish to use this function, you must first connect a USB printer to your device's USB
port. The device must be shown on the screen. You can check the status of the connec-
tion to the USB printer in the Advanced Settings – USB menu.
ì
Activate your device's integrated print server.
Users can set up the connected printer by entering the current IP address of the Gigaset
SX763 WLAN dsl on the PC.
ì
Click OK to apply the changes.
You will find information on setting up a printer connected to the Gigaset SX763 WLAN
dsl in Section "Installing the printer port for network printers" on page 118.
Notes:
u The Windows XP or Windows 2000 operating system is a prerequisite for using the
print server.
u Not all functions may be supported by the print server in the case of special print-
ers, especially multifunction devices (combination of printer, scanner or fax). You
can obtain additional information by contacting the hotline or else on the Internet
(see Quick Start Guide).