Siemens SX763 - Manual (Page 100)

100
Call guide
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / telefone.fm / 08.12.2006
Sc
hablone 2
005_0
5_02
Advanced options
The functions described in this section, which are available to you when making calls via
your Gigaset SX763 WLAN dsl, apply both for external calls and for internal calls. The
functions described below are dependent on the connected terminal in the case of VoIP
extensions.
Toggling telephone calls
#51#
Cancel calling line
identification restric-
tion as default
You have opted to suppress the display
of your number by default (see
above): Dial #51# to cancel this
default.
*#*51#
Calling line identifi-
cation restriction as
default (at
exchange)
Dial *#*51# to prevent your number
being displayed to the other party per-
manently. In contrast to the above set-
ting, this setting is forwarded to the
exchange and is activated there.
*##51#
Cancel calling line
identification restric-
tion default (at
exchange) You have opted to suppress the display
of your number by default (see above,
at exchange): Dial *##51# to cancel
this default setting at the exchange.
Please remember:
When using the signal button R, always wait until you hear a dialling tone before you
enter the phone number for a consultation call.
Key combination Effect Description
R
Phone number
Consultation
Press R to initiate a consultation with
another phone number during a call.
Dial the desired (internal or external)
number for the consultation.
R2
Accept call waiting/
toggle between two
calls
Press R2 to accept an incoming call
during a call. The connection to the
first call is put on hold.
If you terminate the first call before-
hand, your phone rings and you can
take the second call as usual.
By pressing R2 again, you can toggle
to the waiting caller.
Key combination Effect Description