Siemens SX763 - Manual (Page 115)

115
Status information
Gigaset SX763 WLAN dsl/ en / A31008-M707-R131-2-7619 / admin_router.fm / 08.12.2006
Sc
hablone 2
005_0
5_02
Shows the status of the DHCP server of the device for automatic assignment of IP
addresses to clients in the local network.
u DHCP clients
Shows all the clients in the network that have been assigned an IP address. The
Host name and the MAC address are listed as identification for each client. You are
also given information about the IP address assigned to each client and about the
Lease time remaining for the IP address before the client will be assigned a new
address by the DHCP server.
ì
Click Refresh to refresh this screen and update the displayed data.
Wireless Network
You will find information about the wireless network settings on the Wireless Network
screen in the Status menu.
u Status
Shows the status of the connection between the device and the wireless network.
u SSID
Shows the wireless network ID.
u Channel
Shows the radio channel that is currently being used for data transfer in the wireless
network.
u MAC address
Shows the local MAC address of the device for wireless data transfer.
u Wireless clients
Shows all clients in the wireless network that are currently connected to the device.
The Host name, MAC address and IP address are specified for identifying each cli-
ent. You will also see information about the Uptime to date of the current connec-
tion for each client in the wireless network.
u Repeater (WDS)
– Status
Shows the status of the WDS (Wireless Distribution System) in the wireless net-
work for increasing the range.
– WDS links
Shows the current number of connections to other access points or repeaters in
the wireless network.
ì
Click Refresh to refresh this screen and update the displayed data.