Permitted clients – Siemens SX763 User Manual
Page 85
85
Configuring Advanced Settings
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006
Sc
hablone 2
005_0
5_02
Permitted clients
On this screen you can specify the PCs that are to have wireless access to the
Gigaset SX763 WLAN dsl and hence to your LAN and WLAN.
In the Advanced Settings – Wireless Network menu, select Allowed Clients.
The default setting for access control is deactivated. This means that all PCs that use
the correct
can be logged in.
Access control is based on the
of the PC network adapters.
ì
Activate access control by selecting On in the MAC address filter field.
Entering PCs manually:
ì
Enter the MAC address and Device name of the required PCs in the appropriate
fields.
ì
Click the Add button to add the entry to the list.
ì
Click the Delete button to delete the entry from the list.
Note: Only following deletion is the entry transferred to the list of known MAC
addresses.
ì
Apply the settings by clicking OK.
Selecting from the list of logged-in PCs
ì
Select the required PC from the Known wireless clients list. All PCs that were
already entered manually on the router with the MAC address are displayed.
ì
Click the Add button to add the selected PC to the list.
ì
Apply the settings by clicking OK.