Siemens SX763 - Manual (Page 101)

101
Call guide
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / telefone.fm / 08.12.2006
Sc
hablone 2
005_0
5_02
Conference call between three participants
Call answering and forwarding
R0
Reject call waiting
Press R0 to reject an incoming call
during a call.
The second call is rejected automati-
cally after 120 seconds have elapsed.
R1
Terminate one call
and return to the
waiting call
Press R1 to end the current call. You
then switch to the waiting call. The
second call is ended automatically
when you replace the receiver.
Key combination Effect Description
R3
Conference call
When you are making a call and a sec-
ond call is waiting (see above), press
R3
to enable a conference call
between you and the two call parties.
R2
End the conference
call and continue
calls separately
Press R2 to end the conference call.
You are then connected to the previ-
ously active call again and the previ-
ous waiting call is now in the wait
state again.
R4
End conference call
and set up the con-
nection between call
parties
If you press R4 during a conference
call, you end your call and set up a
connection between the other two
external call parties. You can then
replace the receiver. In the case of an
internal conference call, you simply
need to hang up.
End conference call
Replace the receiver to terminate all
calls.
Key combination Effect Description
*21*[number]#
Forward to internal
phone number
Dial *21* and the desired internal
phone number to which all calls are
to be forwarded that are received on
this extension and then press the #
key.
#21#
Delete call forward-
ing
Use the key combination #21# to
delete internal call forwarding, which
you set up as described above.
Key combination Effect Description