Linking a wireless network to an ethernet – Siemens SX763 User Manual

Page 11

The Gigaset SX763 WLAN dsl

Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / introduction.fm / 08.12.2006

hablone 2

004_

08_2

Linking a wireless network to an Ethernet

Wireless local area networks can work easily together with existing Ethernet networks.
If you wish to connect mobile stations to an existing wired network, you must group
together all mobile stations into a wireless local area network in infrastructure mode.

The Gigaset SX763 WLAN dsl has four Ethernet interfaces (LAN ports). Up to four PCs
can be connected directly to these LAN ports.
All PCs can access the Internet via the Gigaset SX763 WLAN dsl.

Please remember:
You can also connect an Ethernet router to a LAN port to access a larger Ethernet. If
you want to link the Gigaset WLAN network to an existing network, a large number of
settings have to be applied. Therefore we cannot provide a general example for this
use; the configuration depends greatly on the networks in question. We advise having
the configuration of such a network carried out by a specialist.

(((

Access point

)))

(((

WLAN (wireless)

Ethernet

(wired)

(((