Siemens SX763 - Manual (Page 110)

110
Administration
Gigaset SX763 WLAN dsl/ en / A31008-M707-R131-2-7619 / admin_router.fm / 08.12.2006
Sc
hablone 2
005_0
5_02
System Log
The System Log is displayed in the Status – Device menu. It contains important infor-
mation about how the device functions and possible problems. This information can
also be automatically transferred to a system log server.
ì
In the Advanced Settings – Administration menu, select System Log to make the
settings for the log:
ì
Log level: Specify how much information is to be contained in the system log. You
can choose between four levels:
– Critical: Log file of the most important information for possible device function-
ality problems
– Debugging: Complete and detailed information on all device functions
– Warning and Informational are intermediate levels.
ì
System log server
– Activate this function if the device system log is to be automatically transferred
to a system log server in the local network.
– Server address:
Enter the IP address for the system log server.
– Server port:
Enter the port of the system log server that is to be used to transfer the system
log.
ì
Click OK to save and apply the changes.
Please remember:
Setting the log level Debugging can generate enormous load on the system
and thus impair the data throughput of the device.