Siemens SX763 User Manual

Page 125

125

Installing the printer port for network printers

Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / printer.fm / 08.12.2006

hablone 2

004_

08_2

If you do not wish to install a printer until later, click Cancel.

Installing a printer on the TCP/IP port retrospectively

If you connect a printer to this port at a later stage, start the installation procedure for
the printer port as above.

In this case, however, you should click the selection menu in the Select a Printer
Port window.

From the list, select the connection you have set up:
e.g. Gigaset_printerport (default TCP/IP port).

Click Next and finish installing the printer driver as instructed in the windows that
follow.

Note:
The print server of the Gigaset SX763 WLAN dsl does not work bidirectionally. It does
not evaluate any of the printer's response messages. For this reason please make sure
that your printer is likewise only configured unidirectionally. You can make the rele-
vant printer settings for your printer by choosing Start – Settings – Printers.