Siemens SX763 - Manual (Page 51)

51
Security Setup Wizard
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006
Sc
hablone 2
005_0
5_02
Access control within the wireless network
In this step you can specify which PCs will have wireless access to the Gigaset SX763
WLAN dsl and hence to the LAN. Access control is based on the
MAC address of the PC
network adapters. You can enter the MAC addresses for the PCs manually or select these
from the list of PCs that are currently logged in.
Access control is disabled by default. This means that all PCs that use the correct SSID
can be logged in.
ì
Next to the MAC address filter, select On to activate the MAC filter.
Entering MAC addresses manually
ì
Enter the MAC address of the network adapter. You will find this address on the
underside of the device.
ì
Enter the name of the PC.
ì
Click the Add button to add the entry to the list.
Selecting from the list of logged-in PCs
ì
Select the required PC from the Known wireless clients list. All PCs that were
already entered manually on the router with the MAC address are displayed.
ì
Click the Add button to add the selected PC to the list.