Siemens SX763 User Manual

Page 92

Configuring Advanced Settings

Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006

hablone 2

005_0

5_02

In the Additional phone numbers fields, you can select which numbers you want
to use for calls on this extension with a prefix. You can choose up to six other con-
nection options from the configured fixed network numbers and VoIP accounts.
Incoming calls for the selected phone number are signalled.

Select Receive calls for all numbers if you wish to receive all incoming calls on all
extensions.

You can configure Divert calls with the following options for the Phone 1 and Phone
2 ports:
– Divert always: Each call for the extension is forwarded to the other extensions.
– When busy: A call for the extension is forwarded to the other extensions if this

extension is busy.

– No reply: A call for the extension is forwarded to the other extensions if the call

is not answered.

Select the Call waiting option if you want to permit a signal for an incoming call
while you are on a call. (Only for Phone 1 and Phone 2 ports).

Select the Call pickup option to have the option to accept all incoming calls on this
extension.

Select Hide own number for outgoing calls (CLIR) if you want to prevent the
number of this extension being displayed for outgoing calls. (Only for Phone 1 and
Phone 2 ports).

Click OK to apply the settings.

Note:
Many service providers either do not support this function or may be unreliable.
Contact your service provider if you want to be certain that CLIR, for example, is
actually supported.