Siemens SX763 - Manual (Page 87)

87
Configuring Advanced Settings
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006
Sc
hablone 2
005_0
5_02
u Do not change the default setting for the Internet connection mode (= "permanent
connection") if you are using VoIP (page 39). You can only be called via VoIP if this
setting is used. Remember, though, that this setting can result in high connection
costs if you have agreed a time-based tariff with your Internet service provider.
VoIP settings
You will receive the access and configuration data for Internet telephony from your serv-
ice provider.
ì
In the Advanced Settings – Telephony menu, select VoIP.
ì
Select On if you wish to use Internet telephony (default setting).
ì
If you have already configured Internet telephony in the Basic Setup Wizard, your
VoIP account will be shown with User name and SIP domain in addition to VoIP
accounts. If you want to change a previously configured VoIP account, click Edit
(page 88).
ì
If you want to configure additional VoIP accounts, click Add (page 88).
If you have configured VoIP settings in the Basic Setup Wizard the data for your VoIP
account is shown in this line. You can edit this data or add new data for additional
accounts.
ì
You can generally accept the default settings for Voice Quality:
– Voice activity detection: If this function is activated, no data will be transmitted
during breaks in speech during a telephone call.
– Comfort noise generation
– Echo canceller delay: If you want to hear your own voice as an echo during VoIP
telephone calls, you should choose a different value from the list.