Siemens SX763 User Manual

Page 40

Basic Setup Wizard

Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006

hablone 2

005_0

5_02

Leave the default settings for the parameters MTU, Line mode, Encapsulation,
QoS class and VPI / VCI, unless your service provider has provided you with other
data.

Specify how Internet sessions are to be established via Connection mode:
– Select Always on if the connection is to exist at all times when the Gigaset SX763

WLAN dsl is turned on.

– Select Connect on demand if applications such as an Internet browser or an e-

mail program are to connect to the Internet automatically.

– In the Idle time before disconnect field, enter a period after which the Internet

connection is to end automatically if no data is transmitted (the default setting is
3 minutes).
You can deactivate this function by entering "0". This means that the connection

will continue to exist even if no data is transmitted. If you are on a time-based tar-

iff, this can result in high charges. In this case you should enter a value other than

"0".
This time setting only applies to the Connect on request option.

– Select Connect manually if you always want to establish and end the Internet

connection manually. If you are on a time-based tariff this will save you high con-
nection charges.

Click Test Settings to check the Internet connection.

An attempt is made to set up an Internet connection. The result is shown in a window.
If the connection could be set up successfully, the Close button appears.

Click the Close button to return to the Basic Setup Wizard.

PPPoE pass-through
PPPoE pass-through allows you to use an additional Internet connection (through
another service provider) on one PC. Further information about this can be found on
page 59.

Note:
Connection to the Internet is only possible if you have entered all the data for your
Internet service provider correctly.

Notes:

This option can result in high connection charges if you are on a time-based
tariff.

You must set up the Always on option if you wish to use Internet telephony.

Note:
If you select Connect on demand or Connect manually, you can establish or end
the Internet connection manually on the start screen for the configuration pro-
gram (page 35).