Siemens SX763 - Manual (Page 126)

126
Installing the printer port for network printers
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / printer.fm / 08.12.2006
Sc
hablone 2
004_
08_2
6
Instructions for setting up a printer on the PC
Once you have installed the printer port you still cannot start printing. The printer port
is nothing more than an additional interface on your PC, comparable with the USB port.
It means that any printer you install on this port is also regarded as a local printer even
though it is located in the network and possibly not directly near you.
You still need to connect the printer to this port and configure it.
ì
Connect the printer to the USB port on your Gigaset SX763 WLAN dsl.
The printer is installed in the same way as any other printer:
ì
Go through Start – Settings – Printers and click Add Printer.
ì
In the window that opens click Next.
ì
Proceed as instructed by the Add Printer Wizard. Please note:
In the window in which you are prompted to specify the location of the printer you
should select Local printer (usually the default setting).
ì
Then click Next.
ì
Continue to install the printer. Select your printer and click Next.
ì
When the window in which you are prompted to enter the type of connection
appears, double-click the port name Gigaset_printerport.
ì
Then continue to install the printer and finish the installation.
Note:
The print server of the Gigaset SX763 WLAN dsl does not work bidirectionally. It does
not evaluate any of the printer's response messages. For this reason, please make sure
that your printer is likewise only configured unidirectionally.