Siemens SX763 - Manual (Page 106)

106
Administration
Gigaset SX763 WLAN dsl/ en / A31008-M707-R131-2-7619 / admin_router.fm / 08.12.2006
Sc
hablone 2
005_0
5_02
set a System Password when you set up the Security Setup Wizard. If so, you can
change it here.
ì
Enter the old System Password in the Current password field.
ì
Enter a new system password in the New password field and repeat it in the
Confirm new password field.
The System Password may contain up to 20 characters. The System Password is case
sensitive. Avoid proper names and all too obvious words. Use a combination of letters,
digits and special characters.
Idle time before log off setting:
ì
Enter the number of minutes after which the configuration program is to be ended
if no further entry is made. The default is 10 minutes. If you enter 0, the program
will never be ended automatically.
ì
Click OK to apply the settings.
System management
Your Gigaset SX763 WLAN dsl offers you the option of using phone-based management
in addition to the configuration program that you access via a PC in your local network.
Note
If you forget your System Password, you have to reset the Gigaset SX763 WLAN dsl
(page 21). This returns all your settings to the factory configuration. This means the
system password is changed back to admin.