Symbol Technologies Spectrum24 AP-4131 - Manual (Page 91)

Configuring the AP
AP-4131 Access Point Product Reference Guide 81
3. Set the default interface for AP C to
WLAP
.
This allows the MUs to roam and transmit data between AP B and C.
If an AP functions as a bridge between wired LANs, Symbol recommends one
LAN contain all the lower WLAP IDs.
In WLAP mode, APs and MUs are required to have the same Preamble
settings for interoperability. Additionally, the root AP is required to be running
before the “leaf” or WLAP connection is established.