8 load acl from file – Symbol Technologies Spectrum24 AP-4131 User Manual
Page 127
Configuring the AP
AP-4131 Access Point Product Reference Guide
117
2.8.8 Load ACL from File
This option loads an ACL from a user defined ACL file (AP_ACL.TXT) entered
on the secondary screen of the Special Functions Menu. The following is an
example of the AP_ACL.TXT.
[ACLIndividual]
Flush
Add 00:A0:F8:FF:01:FB
Add 00:A0:F8:FF:01:FC
Add 00:A0:F8:FF:01:FD
Add 00:A0:F8:FF:01:FE
Add 00:A0:F8:FF:01:FF
;Delete00:A0:F8:FF:00:0A
;Delete00:A0:F8:FF:00:1A
;Delete00:A0:F8:FF:00:2A
[ACLRange]
Add 00:A0:F8:FD:01:00 00:A0:F8:FF:01:20
Add 00:A0:F8:FD:02:00 00:A0:F8:FD:02:20
Add 00:A0:F8:FD:03:00 00:A0:F8:FD:03:20
Add 00:A0:F8:FD:04:00 00:A0:F8:FD:04:20
Add 00:A0:F8:FD:08:00 00:A0:F8:FD:08:20
;Delete 00:A0:F8:FD:05:00 00:A0:F8:FD:05:20
[AddressFilter]
Flush
Add 00:A0:F8:FF:00:03
Add 00:A0:F8:FF:00:04
Add 00:A0:F8:FF:00:05
[TypeFilter]
Add 807e
Add 6006
Add 8001
1. Select
Special Functions
from the Main Menu.
2. Select
Load ACL from File
to load site specific ACL.