Symbol Technologies Spectrum24 AP-4131 - Manual (Page 124)

Configuring the AP
114 AP-4131 Access Point Product Reference Guide
7. Select
Delete-[F1]
to delete a range of Mobile Units.
8. Select
Add-[F2]
to add a range of Mobile Units.
9. Select
Save ALL APs
or press
[F3]
to save the Ranges of Allowed Mobile
Units information to all APs with the same Net_ID (ESS).
This option saves the configuration changes for the current AP, sends two
WNMP messages to all other APs on the Known APs table to update their
configuration and resets after the configuration has been modified.
Users can perform this option only among the same hardware platforms
and firmware version.
10. The system prompts
Warning Update, save, and reset all APs in the Known AP Menu?
yes no
Type
Y
.
11. Select
Cancel-[ESC]
to disregard any changes made to this screen and
return to the previous menu.
When users enable the Access Control option, all MUs within the specified
range can associate with the AP. Specify additional ranges as needed or add
to the ACL using individual address entries.