Symbol Technologies Spectrum24 AP-4131 User Manual
Page 210
Hardware Installation
200
AP-4131 Access Point Product Reference Guide
5. When all WLAP connections are in Forward state:
Special cases:
•
If the WLAP manual BSS_ID is NOT set and no other WLAP is found,
the WLAP goes to the functional state.
•
If the WLAP manual BSS_ID is set and the specified WLAP is not found,
the WLAP remains in FULL Scan state permanently. The LEDs have the
following indicator status permanently:
•
If the WLAP manual BSS_ID is set with the broadcast bit ON (i.e. the first
Byte is 01) and the specified WLAP is not found, the WLAP tries to
associate with another WLAP. If it still cannot find another WLAP, it goes to
Functional State.
•
If the Ethernet Timeout in the System Configuration menu is set to 3,
the WLAP will keep track of the WLAP Alive BPDU. If the BPDU is missing
for WLAP Hello Time seconds, the WLAP state changes to WLAP Lost on
Ethernet and the LEDs have the following states:
LED
State
Power
On
Wired LAN Activity
Blinks if activity occurs
Wireless LAN Activity
Blinks regularly
LED
State
Power
On
Wired LAN Activity
Off
Wireless LAN Activity
Blinks slowly
LED
State
Power
On
Wired LAN Activity
Blinks slowly
Wireless LAN Activity
Off