Symbol Technologies Spectrum24 AP-4131 User Manual

Page 55

Text mode
Original mode

Configuring the AP

AP-4131 Access Point Product Reference Guide

To access the AP UI using a Web browser from a workstation:

1. From the NCPA properties window set the IP address of the workstation

and the subnet mask. The system tells the user to reboot for property
changes to take effect.

The workstation, in this case, is the workstation or laptop computer running
the Web browser.

2. To verify the connection, ping the AP. At the default DOS prompt, type:

Ping -t xxx.xxx.xxx.xxx

–

If the ping receives no response, verify that the hardware
connections, IP address, gateway address and subnet mask are
correct. If correct, contact the site System Administrator for
network assistance.

3. Start a Web browser such as Internet Explorer 4.0 or greater, or

Netscape 3.0 or greater.
Type the IP Address for the associated AP to access the AP using a
Web browser:

http://xxx.xxx.xxx.xxx