Symbol Technologies Spectrum24 AP-4131 - Manual (Page 150)

Configuring the AP
140 AP-4131 Access Point Product Reference Guide
Use the TAB key to scroll through menu items.
To update the AP firmware:
1. Copy the Firmware files dsap3_fw.bin and dsapt3htm.bin on the
terminal or PC hard disk.
2. Telnet to the AP using its IP address.
3. At the prompt type the password:
Symbol
The password is case-sensitive. Set the System Passwords in the Set System
Configuration screen.
The AP displays the Main Menu.
Symbol Access Point
MAIN MENU
Show System Summary AP Installation
Show Interface Statistics Special Functions
Show Forwarding Counts Set System Configuration
Show Mobile Units Set RF Configuration
Show Known APs Set Access Control List
Show Ethernet Statistics Set Address Filtering
Show RF Statistics Set Type Filtering
Show Misc. Statistics Set SNMP Configuration
Show Event History Set Event Logging Configuration
Enter Admin Mode
4. Select
Enter Admin Mode
and enter the password:
Symbol