Symbol Technologies Spectrum24 AP-4131 - Manual (Page 118)

Configuring the AP
108 AP-4131 Access Point Product Reference Guide
2.7.1 Configuring SNMPv3 Security
SNMPv3 defines a method of access point data control known as the View-
Based Access Control Model (VACM). It is a means of restricting access to a
particular subset of data based on the security level used in the request and
specifies whether access should be allowed.
SNMPv3 defines data access for each user (user group) based on identity
and security level. Write access and read access to proprietary information
can be limited to selective users increasing configuration alternatives in
respect to sensitive data.
Select SNMPv3 Security Admin from the SNMP Configuration screen to
display the SNMP User Security Configuration screen. Use this window to
view defined user groups, their context (group definition) and security level.
Symbol Access Point
SNMPv3 User Security Configuration
User/Group Name Context Name Security Level
-------------------------------------------------------------------------------------
1) guest noAuthNoPrivacy
2) Symbol noAuthNoPrivacy
3) user3 admin3 authNoPrivacy
4) user4 admin4 authPrivacy
5) user5 admin5 authNoPrivacy
6) user6 admin6 authPrivacy
Configure User/Group-[CR] Save All APs-[F2] Exit-[ESC]