Symbol Technologies Spectrum24 AP-4131 - Manual (Page 79)

Configuring the AP
AP-4131 Access Point Product Reference Guide 69
2.4.2 System Password Administration
This screen allows the network administrator to configure the passwords for
the AP. The user password allows the user to Telnet into the AP or use the
serial port and have read-only privileges. Accessing the UI in an Admin
mode session through the serial port the session does not time-out.
Entering the Admin mode with Telnet and Serial Port interfaces enabled
allows the Admin mode on both interfaces. This can cause a security breach
if a user, without admin privileges, Telnets into the AP while the admin
security level is enabled.
1. To access and change the System Passwords, select
System Password
Admin-[F4]
from the System Configuration Menu. The Change System
Passwords screen displays:
Symbol Access Point
Change System Passwords
User Password *******
Admin Password *******
Save-[F1] Cancel-[ESC]
Password for user access(Monitor only)