Symbol Technologies Spectrum24 AP-4131 - Manual (Page 113)

Configuring the AP
AP-4131 Access Point Product Reference Guide 103
1. Select Set SNMP Configuration from the Main Menu to AP display:
Symbol Access Point
SNMP Configuration
.SNMP Agent Mode Enabled SNMPv3 Security Admin-[CR]
.Read-Only Community (v1/2c) *******
.Read-Write Community (v1/2c) *******
.Trap Host1 157.235.95.10
.Trap Host2
.All Traps Enabled
Generic Traps: Enterprise-Specific Traps:
.Cold Boot Disabled .Radio Restart Disabled
.Authentication failure Disabled .Access Cntrl Violation Disabled
.MU State Change Disabled
.DHCP Change Disabled
.WLAP Connection Change Disabled
.Security Protocol Errors Disabled
OK-[CR] Save-[F1] Save All APs-[F2] Cancel-[ESC]
(Use the space bar or left/right cursor keys to change)