Symbol Technologies Spectrum24 AP-4131 - Manual (Page 114)

Configuring the AP
104 AP-4131 Access Point Product Reference Guide
2. Configure the settings as required:
SNMP Agent
Mode Defines the SNMP agent mode:
Disabled
disables SNMP functions, while
Enabled
allows SNMP functions.
Read-Only
Community User-defined password string up to 31characters
identifying users with read-only privileges.
Read-Write
Community User-defined password up to 32 characters for users
with read/write privileges.
Trap Host1 The Trap Host1 IP address or Name.
Trap Host2 The Trap Host2 IP address or Name.
All Traps Enables or disables all trap operations.
The default value is
Disabled
.
Cold Boot Sends a trap to the manager when the AP cold boots.
The default value is
Disabled
.
Authentication
failure Indicates that community strings other than those
specified for the Read-Only and Read/Write
Community were submitted.
The default value is
Disabled
.
SNMPv3
Security Admin Displays the SNMPv3 User Security Configuration
screen used for viewing and configuring SNMPv3
security for user groups. SNMPv1/2c users should not
select SNMPv3 Security Admin unless configuring users
for SNMPv3 operations. Changing the factory
configuration could adversely effect SNMPv1/2c
operation.
Radio Restart Sends a trap to the manager for radio restart.
The default is value
Disabled
.
Access Cntrl
Violation Sends a trap to the manager when an ACL violation
occurs. The default value is
Disabled
.