Symbol Technologies Spectrum24 AP-4131 - Manual (Page 168)

Configuring the AP
158 AP-4131 Access Point Product Reference Guide
2.21 Configuring Network Time
The access point is able to display the local time of the server used to validate
requests for secured (password protected) resources. To view the access point
network time:
1. From the Main Menu, select the Special Functions Menu.
Only use the Configure Network Time screen when the WLAN KSS utility is
not being used. Network time is needed to associate the time of day to MU
requests for access point resources.
2. Select Configure Network Time to display the Configure Network Time
screen.
Symbol Access Point
Configure Network Time
Time of Day 14:00 PST
Time Server Racheal
Time Zone PST
Clock Skew 300
OK-[CR] Save-[F1] Save All APs-[F2] Cancel-[Esc]
3. Configure the settings as required.
Time of Day Current time and time zone.
Time Server Name or IP address of the time server.
Time Zone Configurable time zone of the access point.
Clock Skew Allowable time difference from the server (in
seconds). The access point assumes the clock
skews one minute per hour and re-synchronizes
with the time server after the Clock Skew period
multiplied by 60.