Symbol Technologies Spectrum24 AP-4131 - Manual (Page 167)

Configuring the AP
AP-4131 Access Point Product Reference Guide 157
2.19 Resetting the AP
Resetting an AP clears statistics and restores the last saved configuration. If
users make unsaved changes, the AP clears those changes and restores the
last saved configuration on reset.
•
Select Special Functions from the Main Menu.
• Select Reset AP.
The AP flashes its LEDs as if powering up and returns to a
STATUS-flashing state.
2.20 Restoring the Factory Configuration
If the AP fails to communicate due to improper settings, restore the factory
configuration defaults. Restoring configuration settings clears all
configuration and statistics for the AP depending on the DHCP setting.
To restore factory configuration:
1. Select Special Functions from the Main Menu.
2. Select
Restore Factory Config
. The AP erases all configuration
information and replaces it with the factory configuration.
3. The AP automatically resets.
When the factory configuration is restored, the ACL list is erased. The Country
Configuration and Channel Setting are not erased.
DHCP Disabled All AP configuration and statistics are reset, except the AP
Installation screen
DHCP Enabled All AP configuration and statistics are reset.