Symbol Technologies Spectrum24 AP-4131 - Manual (Page 109)

Configuring the AP
AP-4131 Access Point Product Reference Guide 99
2. Configure the EAP-TLS authentication settings as required:
EAP-TLS/RADIUS When enabled, the access point assumes the role
of authenticator. The access point proxies the
MU’s requests to authenticate with the EAP server.
Default is Disabled.
Quiet Period The time the access point waits before attempting
to acquire an MU. Default is 60 seconds.
Tx Period Defines the length of time the access points waits
for an MU’s response once the access point
requests an MUs identity. Default is 30 seconds.
Re-authentication When enabled, the access point forces the MU to
re-authenticate after the re-authentication period.
Default is Enabled.
Re-auth Period Defines the length of time a MU is waits before
initiating re-authentication attempts.
Default is 3600 seconds.
Re-auth Max Defines the number of MU re-authentications
attempts permitted. Default is 2. If exceeded, the
access point fails MU re-authentication.
Supplicant
Timeout Time permitted for a response from the
authenticating MU. Default is 30 seconds.
Server Timeout Time permitted for a response from the EAP-TLS
authentication server. Default is 30 seconds.
Max Req Retries Defines the maximum number of times an access
point re-transmits an EAP request. Default is 2.
IAS Name/IP
Address Name or IP address of the authentication server.
Backup IAS
Name/IP Name or IP address of the backup authentication
server.
IAS Password The shared secret password between the access
point and authentication server.