Symbol Technologies Spectrum24 AP-4131 - Manual (Page 176)

Monitoring Statistics
166 AP-4131 Access Point Product Reference Guide
Use TAB or arrow keys to highlight the desired screen. Press ENTER to display
the selected screen.
•
Select Regular from the Mobile Units prompt to display:
Symbol Access Point Mobile Units
00:A0:F8:29:C9:E2: C:R11:
00:A0:F8:10:4A:13 P:R11:
00:A0:F8:9F:A1:71 A:R11
Info-[CR] Echo-[F1] Timed-[F2] Next-[F3] Auth-[F4] Exit-[ESC]
addr [p:i:#:V]
Where:
• To bring up the WNMP Packet Ping Function screen, press TAB to
highlight the MU and select
Ping
. This allows the AP to ping an MU.
See section 2.16: ”Performing Pings” on page 152.
–
Select
Timed
to automatically update this display every two seconds.
– Select
Next
to display the next screen.
– Press ESC to return to the previous menu.
addr MU MAC address in xx:xx:xx:xx:xx:xx format
P, C or A MUs power mode: P for PSP and C for CAM. An away or
unassociated MU displays an A.
# AP current Radio transmit rate for the messages sent to this MU:
11 for 11 Mbps.
S Shared Key is enabled for this device.
V Indicates a Symbol Voice enabled device.
K MU obtained a session key.
N MU failed to obtain a session key.