Symbol Technologies Spectrum24 AP-4131 - Manual (Page 125)

Configuring the AP
AP-4131 Access Point Product Reference Guide 115
2.8.3 Adding Allowed MUs
The Access Control List screen provides a facility to add MUs to the ACL.
1. Select the Set Access Control List option from the Main Menu to display:
Address Type? range individual
2. Use the UP/DOWN-ARROW keys to toggle between
range
and
individual
. Select
individual.
3. Press
Add-[F2]
. The AP prompts for a MAC address.
00:00:00:00:00:00
4. Enter the MAC address.
Users can enter MAC addresses without colons.
5. Select
Save ALL APs
or press
[F4]
to save the Adding Allowed MU
information to all APs with the same Net_ID (ESS).
This option saves the configuration changes for the current AP, sends two
WNMP messages to all other APs on the Known APs table to update their
configuration and resets after the configuration has been modified.
Users can perform this option only among the same hardware platforms
and firmware version.
6. The system prompts
Warning Update, save, and reset all APs in the Known AP Menu?
yes no
Type
Y
.
7. Select
Cancel-[ESC]
to disregard any changes made to this screen and
return to the previous menu.
2.8.4 Removing Allowed MUs
The Allowed Mobile Units screen provides a facility to remove MUs from
the ACL.
1. Highlight the entry using the UP/DOWN-ARROW keys.
2. Press
Delete - [F1].