Printing of preset data – SATO HT200e User Manual

Page 96

SECTION 5

： PRESET, TABLE DATA

Page 5-4

SATO HT200e

PRINTING OF PRESET DATA

[RCL]

[ENTR]

Note: Where asterisk mark or “*” can be seen in the upper right on the screen, entry by scanner

can be made possible.

ＦＯＲＭＡＴ

Ｎｏ

1 ［

・

・］

ＨＴ２００ｅ

［ＰＲＥＳＥＴ］

ＰＲＩＮＴ

ＳＴＲ

ＭＯＤＩＦＹ

ＤＥＬ

ＤＵＭＰ

ＭＡＳＴＥＲ

ＰＲＥＳＥＴ

ＮＯ．ＩＮＰＵＴ＊

・

・・・

＜ＰＲＩＮＴ＞

［ＩＴＥＭ

］

・

・・・・・・・・

［ＰＲＩＣＥ

］

￡

・

・・・・・

［ＱＴＹ

］

・

・・・

ＰＲＩＮＴＩＮＧ

Press [RCL], so that it goes from the modes of the
print to the preset.

The screen for the selection of preset printing will
be displayed: Press [ENTR], so that it goes to the
entry of preset number.

The preset No. that is required to print can be
entered: Press [ENTR], so that it displays the pre-
set data specified.

Since the contents of data differ, based on the
format number retrieved, press [ENTR] by
checking data in each field.

Enter the No. of paper within 4 digits, and press
[ENTR]. Note that neither 0 nor un-entry is
permitted.

Preset will start printing:
Note: where the No. of print becomes 0, it goes
back to the process No. 3.