SATO HT200e - Manual (Page 83)

SECTION 4 ： FREE MODE
Page 4-20 SATO HT200e
It will go to the entry for copy.
０ １ １ １ : Ｃ Ｈ Ａ Ｒ Ｐ Ｉ Ｔ Ｃ Ｈ
7
１ １ ２ ０ ２ ５ ０ ３ ２ ０ ２ ０ ０ ０ ０ ０
０ １ １ ２ : Ｃ Ｈ Ａ Ｒ Ｃ Ｏ Ｕ Ｎ Ｔ
8
１ １ ２ ０ ２ ５ ０ ３ ２ ０ ２ ０ ０ ０ ０ ０
０ １ １ ４ : Ｖ － Ｅ Ｘ Ｐ Ａ Ｎ Ｓ Ｅ
9
１ １ ２ ０ ２ ５ ０ ３ ２ ０ ２ ０ ８ ０ ０ ０
０ １ １ ５ : Ｈ － Ｅ Ｘ Ｐ Ａ Ｎ Ｓ Ｅ
10
１ １ ２ ０ ２ ５ ０ ３ ２ ０ ２ ０ ８ １ ０ ０
０ １ １ ６ : Ｉ Ｎ Ｐ Ｕ Ｔ Ｃ Ｈ Ｅ Ｃ Ｋ
11 ０ : Ｎ Ｏ Ｃ Ｈ Ｅ Ｃ Ｋ ▽
１ １ ２ ０ ２ ５ ０ ３ ２ ０ ２ ０ ８ １ １ ０
０ １ １ ７ : Ｓ Ｅ Ｔ Ｔ Ｉ Ｔ Ｌ Ｅ
12
０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０
０ １ １ ８ : Ｔ Ａ Ｂ Ｌ Ｅ Ｎ ｏ
13 １ : Ｔ Ａ Ｂ Ｌ Ｅ １ ▽
１ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０
０ １ １ ９ : ０ Ａ Ｕ Ｔ Ｏ － Ｉ Ｎ Ｓ
14
１ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０
０ １ ２ ０ : Ｐ Ｒ Ｅ Ｓ Ｅ Ｔ
15 ０ : Ｏ Ｆ Ｆ １ : Ｏ Ｎ
１ ０ １ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０
０ １ ２ １ : Ｃ Ｏ Ｌ Ｏ Ｒ
16 ０ : Ｂ Ｌ Ａ Ｃ Ｋ ３ : Ｒ Ｅ Ｄ ▽
１ ０ １ １ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０
Value in one digit can be entered for spacing between
characters: Select the value from “0” to “9”.
Value in 2 digits can be entered for the number of
characters: Select the values from “01” to “32”.
Value in one digit can be entered for the magnification
of vertical expansion: Select the value from “1" to”4”.
Value in one digit can be entered for the magnification
of horizontal expansion: Select the value from “1" to”4”.
Value in one digit can be entered for the input check:
Select “0” or “2”.
Title can be displayed:
(Note: It will be displayed in only one field per format.)
Value in one digit can be entered for the table No.:
Select the value from “1”, “2”, and “3”.
Value in one digit can be entered for with or without
0 insertion: Select “0” or “1”.
Value in one digit can be entered for preset:
Select “0” or “1”.
Value in one digit can be entered for print color.
Select from “0”, “3”, and “4”.