SATO HT200e - Manual (Page 127)

SECTION 7: OTHERS
SATO HT200e Page 7-7
PROCESS FOR ASCII DUMP ON SCREEN
Ｆ Ｏ Ｒ Ｍ Ａ Ｔ Ｎ ｏ ．
1 〔 ・ ・ 〕
Ｈ Ｔ ２ ０ ０ ｅ
2 【 Ａ Ｓ Ｃ Ｄ Ｕ Ｍ Ｐ Ｍ Ｏ Ｄ Ｅ 】
Enter “72”, and press [ENTR].
Data (STX to ETX) received will be printed in ASCII.
Note 1: Power should be “OFF” when on-line mode
is canceled.
Note 2: Data between STX (02H) to ETX (03H) are
made only available for the ASCII dump.
Note 3: Maximum No. of characters to be printed
will be 754.
Note 4: A P51mm x W48mm label is only available.
Note 5: Press [FEED], so that one blank label will be
carried.
[A sample of print
on ASCII dump]
[A sample of print]