SATO HT200e - Manual (Page 11)

SATO HT200e VII
Thermal Head:
- BE CAREFUL t
head. This is because thermal head after prin ing becomes elevated
temperatures.
- BE CAREFUL if touching the edge of thermal head by naked hands
when changing paper or cleaning the head--some kind of injury may
occur.
- DO NOT CHANGE thermal head by your routine. This may cause injury,
burn, or electric shock.
Opening and Closing of Thermal Head:
- BE CAREFUL not to include any foreign materials other than paper
when opening and closing the head. This may cause you hurt or dam-
age to it.
Paper Setting:
- BE CAREFUL, when setting paper, not to put your finger on between
paper and paper feeding portion.
- BE CAREFUL not to hurt when disengaging the cover of paper feeding
opening.
When Not in Use for A Long Period:
- PULL power code OUT from the outlet for your safety when not in use.
When Cleaning:
- PULL power code OUT from the outlet for your safety when cleaning
printer.
ATTENTION: PC CARD
• A used standard lithium cell (non-chargeable) shall be taken insulating measure, such
as sealing with tape on both porlarities (plus and minus), and contact disposal contrac-
tor for industrial wastes.
BATTERY PACK
• To save resource for effective use, a used battery pack shall be taken insulating mea-
sure, such as sealing with tape on contact surfaces, and contact our sales representa-
tive or service staff for its disposal.
• DO NOT MIX BATTERY PACK WITH OTHER CELLS.
Warning
SAFETY PRECAUTIONS