Display on the screen for barcode field – SATO HT200e User Manual

Page 90

SECTION 4

： FREE MODE

SATO HT200e

Page 4-27

DISPLAY ON THE SCREEN FOR BARCODE FIELD

Field No. Position of digit

　　　　It will go to the entry for character pitch.　

Note: Use [FMT] to return to the entry of the format number to be registered.

Press [ENTR] to determine the data selected, so that the entry for fixed data can be reached.

０１

０１ : ＦＬＤ

ＴＹＰＥ

1 ７ : ＢＡＲＣＯＤＥ

０

０００００００００００００００

０１

０２ : ＤＡＴＡ

ＴＹＰＥ

2 ０ : ＨＵＭＡＮＦＯＮＴ

ＯＦＦ ▽

７

０

００００００００００００００

０１

０３ : ＳＹＭＢＯＬＯＧＹ

3 ０ : ＮＷ７

１ : ＣＯＤＥ３９

▽

７０

０

０００００００００００００

０１

０４ : Ｖ－ＰＯＳＩＴＩＯＮ

７０１

０

００００００００００００

０１

０７ : Ｈ－ＰＯＳＩＴＩＯＮ

７０１０２５

０

０００００００００

０１

１０ : ＲＯＴＡＴＩＯＮ

6 ０ : ０ °

２ : １８０ °

７０１０２５０３２

０

００００００

Enter “7” for the field type.

Value in one digit can be entered for the bar code type:
Select the value from “0” to “7”.

Value in 3 digits can be entered for the vertical position:
Select the values from “001” to “784”.
Note: “000” is a field where only entry is required, so

that no print is made.

Value in 3 digits can be entered for the horizontal
position: Select the values from “001”to “384”.

Value in one digit can be entered for the data type:
Select “0” or “1”.

Value in one digit can be entered for the rotation:
Select “0” or “2”.