Specification – SATO HT200e User Manual
Page 15
SECTION 1 SPECIFICATION
SATO HT200e
Page 1-1
SECTION 1:
SPECIFICATION
SPECIFICATION
Model HT200e
Print Method
Direct Thermal
Printer module
0.125 mm
(0.0049")
Resolution
203 dpi
(8dpmm)
Speed
60 or 80 mm/s
(2.4"/s or 3.1"/s)
*60mm/s when used with battery
Print Area (Max)
48mm (1.89") W x 96mm (3.78”) L
MEDIA
Normal
Width
25.4 ～ 48.0 mm
(0.98" ～ 1.89")
Width (Backing Paper size)
28.0 ～ 51.0 mm
(1.10" ～ 2.01")
Pitch
13.0 ～ 100.0 mm
(0.51" ～ 3.94")
Pitch (Backing Paper size)
16.0 ～ 103.0 mm
(0.63" ～ 4.06")
Caliper
0.14 ～ 0.19mm
(Thickness)
Dispense
Width
25.4 ～ 48.0 mm
(0.98" ～ 1.89")
Width (Backing Paper size)
28.0 ～ 51.0 mm
(1.10" ～ 2.01")
Pitch
25.4 ～ 48.0 mm
(0.98" ～ 1.89")
Pitch (Backing Paper size)
25.4 ～ 50.0 mm
(0.98" ～ 1.96")
Caliper
0.14 ～ 0.19mm
(00055" ～ 0.0075")
Roll Outer diameter (MAX)
75mm
(2.95")
Core Inner diameter (Min)
26.5mm
(1.1")
Wind
Face-In or Face-Out
PRINTER
Sensor type
Reflective sensor for use with pre-printed sensing eye-marks
Operational Panel Switch
FNC1, FNC2, FMT, PGUP, RCL. AC, 0 ～ 9,
SHIF, SET, FEEDS/S, ENTR, DEL, DATE, #, $!"
Self Diagnosis Checking
Cover open, Paper end, Head check, Test print, Battery check