SATO HT200e User Manual

Page 72

SECTION 4

： FREE MODE

SATO HT200e

Page 4-9

FIELD SETTING FOR BAR CODE

Based on the field designation, the setting, in which “70/71: Bar Code” is specified, is described.

Note 1: For the position of rotation, see 1. in Additional Information for Parameter.
Note 2: The rotation position of 90 and 270° is a hidden mode; the guidance will not be displayed.
Note 3: When horizontal direction is enlarged, space between characters will be increase.

Note 4: When CODE 128 is being set, specify “1”.

Digit

position (s)

Designated

item

Description

1, 2

Field designation 70: Human readable information (HRI) is NOT available.

71: HRI is available.

Bar code type

0: NW-7 1: CODE 39
2: INT

２ o f5

3: AN13/UPC-A

4: EAN 8
5: UPC

－ E

6: CODE 128 (C set)

7: CODE 12 (B set)

4, 5, 6

Vertical position

001 to 784 dot (s): Vertical print position

000: Entry only, where print is not required.

7, 8, 9

Horizontal

position

001 to 384 dot (s): Horizontal print position

Rotation position

(Note 1)

0°

2: 180°

1: 90° (Note 2)

3: 270° (Note 2)

Character pitch

(Note 3)

0 to 9 dot (s)

Note that if HRI is available, it means spacing between the

characters in it.

12, 13

Character count

01 to 22: Number of digits in the bar code

EAN

8: 08

EAN 13: 13

UPC-A : 12

UPC-E : 07

Note that Start/Stop is not included for NW-7/CODE 39.

Bar ratio

0 = Invalid (EAN, UPC-A, and UPC-E)

1 = 1:2

2 = 1:2.5

3 = 1:3

Bar expansion

2 to 4: (Ratio 1: 2.5 will be enlarged only to twofold and

fourfold)

　Input Check Digits
16, 17, 18 Bar height

001 to 240 dot (s)

Check digit

(Note 4)

0: No C/D
1: C/D creation (Computing

）

2: C/D check (with input data)

3: Price C/D (Only for EAN 13)

Preset

0: No entry in printing preset (Not displayed)

1: Entry in printing preset (Displayed)

Reserved

0: Determined