Boot options” submenu – Siemens Simatic 620 User Manual
Page 98
Configuring the SIMATIC Box PC 620
5-10
SIMATIC Box PC 620 Manual
A5E00131465-01
”Boot Options” Submenu
The following submenu appears when you select the option “Boot Options” in the
main menu:
PhoenixBIOS Setup Utility
Item Specific Help
QuickBoot Mode:
ESC
Exit
Select Item
Select Menu
+ / –
Select
Change Values
Sub-Menu
F9
F10
Setup Defaults
Save and Exit
SETUP prompt:
[Enabled]
POST Errors:
[Enabled]
Floppy check:
Allows the system to
skip certain tests
while booting. This
will decrease the
time needed to boot
the system.
Enter
Help
F1
Main
Boot Options
[
Enabled
]
Summary screen:
[Disabled]
[Enabled]
Figure 5-5
”Boot Options” Submenu
Quick Boot
Mode
Some hardware tests are skipped to speed up the boot procedure.
SETUP prompt The message PRESS
screen during the system run-up phase.
POST Errors
The boot process is stopped if an error is detected; you must press F1 to
acknowledge. Enter “Disabled”to avoid the necessity of acknowledging
errors, for example if no keyboard is connected.