Siemens Simatic 620 - Manual (Page 103)

Configuring the SIMATIC Box PC 620
5-15
SIMATIC Box PC 620 Manual
A5E00131465-01
5.1.2 The Advanced Menu
Menu Structure
PhoenixBIOS Setup Utility
Item Specific Help
ESC Exit
Reset Configuration Data:
Select Item
Select Menu
+ / –
Select
Change Values
Sub-Menu
F9
F10
Setup Defaults
Save and Exit
COM/LPT Configuration
Floppy disk controller: [Enabled]
[ No ]
Select the operating
system installed
on your system which
you will use most
commonly.
Note: An incorrect
setting can cause
some operating
systems to display
unexpected behavior.
Enter
Help F1
Security Power Boot Sequence Version Exit Main
Large Disk Access Mode: [DOS]
Local Bus IDE adapter: [Both]
Advanced
Memory Gap at 15 Mbyte: [Disabled]
Video Adapter Settings
Installed O/S: [ Other ]
PCI Configuration
Setup Warning
Setting items on this menu to incorrect values may
cause your system to malfunction
Figure 5-9 “Advanced” Menu
Setting in the Advanced Menu
Installed O/S Plug and Play means that all modules are automatically detected and
installed, providing they support the Plug and Play functionality.
[other]
BIOS handles the entire Plug and Play capability,
default configuration
[Win95], [Win98], The operating system handles some of the Plug
[WinMe], [Win2000] and Play functions
Reset
Configuration
Data
[Yes] All installations under Plug and Play are deleted and
reconfiguration is triggered the next time the system
boots. The entry is then reset to [No]. System
components that do not support Plug and Play have
to be entered manually.
Floppy Disk
Controller
[Enabled] Floppy Disk Controller on the motherboard is
activated.
[Disabled]
Floppy Disk Controller on the motherboard is
deactivated (with LS 240 drive).