Juniper Networks J4350 - Manual (Page 86)

J4350 and J6350 Services Router Getting Started Guide
idle-timeout Set maximum idle time before login session ends
prompt Set CLI command prompt string
restart-on-upgrade Set whether CLI prompts to restart after software upgrade
screen-length Set number of lines on screen
screen-width Set number of characters on a line
terminal Set terminal type
Table 29 shows how you can change the CLI environment features.
Table 29: Configuring the CLI Environment
Environment
Feature CLI Command Default Setting Options
Command
completion set cli
complete-on-space
(on | off) on—Pressing Tab or Spacebar
completes a command. Set off to allow only Tab for
command completion.
Set on to re-enable Tab and
Spacebar for command
completion.
Your working
directory set cli directory
path 8 /cf/var/home/remote Replace path with the directory you
want to enter when you log in to the
Services Router.
Minutes of idle time set cli idle-time
minutes Your session never times out unless
your login class specifies a timeout. To enable the timeout feature,
replace timeout with a value
between 1 and 100,000.
To disable the timeout feature,
replace timeout with 0.
Your session prompt set cli prompt string user@host > Replace string with the prompt you
want. If the prompt contains spaces
or special characters, enclose string in
quotation marks (“ “).
Restart-after-upgrade
prompt set cli
restart-on-upgrade
(on | off) CLI prompts you to restart the
Services Router after a software
upgrade. Set off to disable the prompt for
the session.
Set on to reenable the prompt.
Number of CLI
output line displayed
at once set cli screen-length
length Variable (depends on terminal type). To change the number of lines
displayed on the screen, replace
length
with a value between 1
and 100,000.
To disable the display of a set
number of lines, replace length
with 0. (This feature can be
useful when you are issuing CLI
commands from scripts.)
66 Using the Command-Line Interface