Juniper Networks J4350 - Manual (Page 197)

Contacting Customer Support and Returning Hardware
Figure 56: Location of Serial Number ID Label on Bottom of Chassis
POWER
PO WER ST AT US
ALARM HA
RESET
CONSOLE AUX USB
1
0
CONFIG
PORT 0
STATUS
PORT 1
STATU S
10/100/1000
g003832
N10070 N10070
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference received,
including interference that may cause undesired operation.
INPUT: AC 100-240V~ A, 50/60 Hz
INPUT: DC -48V to -60V MAX. 20A
Made in Malaysia CMY
US C
J-4350-JB-DC-N
0156012006000098
0010dbd38580
Serial ID label
1 4
5
6 2
3
SLOT N UMBE R
E E
The following sections describe the label location on each type of component:
PIM Serial Number Label on page 177
J6350 Power Supply Serial Number Labels on page 177
PIM Serial Number Label
PIMs are field-replaceable. Each PIM has a unique serial number. The serial number
label is located on the right side of the PIM, when the PIM is horizontally oriented
(as it would be installed in the router). The exact location may be slightly different
on different PIMs, depending on the placement of components on the PIM board.
J6350 Power Supply Serial Number Labels
The power supplies installed in the J6350 Services Router are field-replaceable.
Each power supply has a unique serial number. The serial number label
is located on the top of the power supply.
Locating Component Serial Numbers 177