Juniper Networks J4350 User Manual
Page 171
Replacing and Troubleshooting Hardware Components
Figure 42: Alternative Horizontal Orientation of Compact Flash Disk
g003838
Compact
flash drive
To replace the compact flash disk:
1.
Place an electrostatic bag or antistatic mat on a flat, stable surface.
2.
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist and
connect the strap to the ESD point on the chassis, or to an outside ESD point if
the router is disconnected from earth ground. For more information about
ESD, see “Preventing Electrostatic Discharge Damage” on page 205.
3.
Press and release the power button to power off the router. Wait for the
POWER
LED to turn off.
4.
Remove the power cord or cable from the power source receptacle.
5.
Remove the screws from the sides and top of the chassis that secure the
cover to the chassis.
6.
Slide the cover off the chassis.
Replacing Hardware Components
151