Juniper Networks J4350 - Manual (Page 65)

Physical Interface Modules Overview
Figure 23: ADSL 2/2+ Annex B PIM
STATUS
ONLINE
PORT 0
ADSL-B
g002332
The ADSL PIM provides the following key features:
Onboard network processor
ADSL, ADSL2, and ADSL2+ protocols on the same PIM
“Dying gasp” notification
Asynchronous Transfer Mode (ATM) Adaptation Layer 5 (AAL5) encapsulation
For pinouts of cable connectors for ADSL PIMs, see “ADSL and G.SHDSL
RJ-11 Connector Pinout” on page 199.
For alarms, see the configuring and monitoring alarms information in
the J-series Services Router Administration Guide.
For installing and removing a PIM, see “Replacing a PIM” on page 144.
The ADSL PIMs have two LEDs to indicate the status of the PIM and its port.
Table 23 describes the meaning of the LED states.
Table 23: LEDs for ADSL PIMs
Label Color State Description
Green On steadily PIM passed the self-test and is online and
operational. ONLINE
Unlit Off PIM is offline.
Green On steadily Online with no alarms or failures. STATUS
Red On steadily Active with local or remote alarms. The router
has detected a failure.
Field-Replaceable PIMs 45